Standards Amendments

Collected amendments to Australian Standards. Available to subscribers of Australian Standards.

Name	Publisher
AS/NZS 5601.2:2020 Amd 2:2024 Gas installations, Part 2: LP Gas installations in caravans and boats for non-propulsive purposes	Current Standards Australia/Standards New Zealand	This Amendment applies to the following elements:• Global changes• Clauses 1.1.2, 1.1.3.1, 1.1.3.4, 1.2, 1.3, 1.4, 2.2.1, 2.2.2, 2.2.3, 2.8.1, 2.8.4, 2.8.6, 2.9.1, 2.9.2, 2.9.3, 2.9.4, 2.9.5, 2.9.6, 2.13.3, 2.13.3.1, 2.13.3.2, 3.1.8, 4.2, 5.1.4.1, 5.1.4.2, 5.1.7, 5.2.7.3, 5.2.12.2, 5.2.12.3, 6, 6.1, 6.1.1, 6.1.2, 6.1.3, 6.1.4, 6.3.2, 6.3.3, 6.3.4, 6.3.5, 6.3.6, 6.5, 6.6, 6.7, 6.11.1, 7.1, 7.2, 7.3.1, 7.3.2, 7.4.1, 7.4.3, 8.1, 8.4.1, 9.2, 9.3.2.2, 9.4, 9.7, 9.8, 9.9.1, 9.10.1, 10.3.1, C.4, C.5.2, C.5.4, C.6.4, E.1.1, E.1.2, E.2.1, E.3.2.1, E.3.3.1, H.1, H.2, H.3, L.3.3.4• Figures 3.1.8(E), 7.3.1• Table 5.1.4.3• Bibliography
AS/NZS 5601.1:2022 Amd 2:2024 Gas installations, Part 1: General installations	Current Standards Australia/Standards New Zealand
AS/NZS 4859.1:2018 Amd 1:2024 Thermal insulation materials for buildings, Part 1: General criteria and technical provisions	Current Standards Australia/Standards New Zealand
AS 1684.3:2021 Amd 1:2024 Residential timber-framed construction, Part 3: Cyclonic areas	Current Standards Australia	This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3 and 8.3.6.5, Figure 6.3, Table 8.18, 9.19 and 9.20, Bibliography.
AS/NZS 1260:2017 Amd 1:2024 PVC-U pipes and fittings for drain, waste and vent applications	Current Standards Australia/Standards New Zealand
AS 1067.1:2016 Amd 1:2021 Eye and face protection - Sunglasses and fashion spectacles, Part 1: Requirements	Current Standards Australia
AS/NZS 1428.4.1:2009 AMDT 1 Design for access and mobility, Part 4.1: Means to assist the orientation of people with vision impairment - Tactile ground surface	Current Standards Australia/Standards New Zealand
AS/NZS 1170.0:2002 AMDT 5 Structural design actions, Part 0: General principles	Current Standards Australia/Standards New Zealand
AS 3610-1995 AMDT 1 Formwork for concrete	Superseded Standards Australia
AS/NZS 1170.0:2002 AMDT 4 Structural design actions, Part 0: General principles	Current Standards Australia/Standards New Zealand
AS 3958.1:2007 Amd 1:2010 Ceramic tiles, Part 1: Guide to installation of ceramic tiles	Superseded Standards Australia
AS 3999:2015 Amd 1:2020 Bulk thermal insulation - Installation	Current Standards Australia
AS 4773.2:2015 Amd 1:2020 Masonry in small buildings, Part 2: Construction	Current Standards Australia
AS/NZS 3012:2010 Amd 1:2015 Electrical installations - Construction and demolition sites	Superseded Standards Australia/Standards New Zealand
AS/NZS 14763.3:2017 Amd 1:2018 Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)	Current Standards Australia/Standards New Zealand
AS/NZS 4836:2011 Amd 1:2017 Safe working on or near low-voltage electrical installations and equipment	Superseded Standards Australia/Standards New Zealand	Provides workers on low-voltage electrical installations with: (a) the principles of safe working practices; and (b) recommended procedures for safe working practices.
AS/NZS 3012:2019 Amd 1:2020 Electrical installations - Construction and demolition sites	Current Standards Australia/Standards New Zealand
AS/NZS 3500.1:2018 Amd 1:2019 Plumbing and drainage, Part 1: Water Services	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 1891.4:2009 Amd 1:2021 Industrial fall-arrest systems and devices, Part 4: Selection, use and maintenance	Current Standards Australia/Standards New Zealand
AS 1684.2:2021 Amd 1:2024 Residential timber-framed construction, Part 2: Non-cyclonic areas	Current Standards Australia	This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3, 8.3.6.5, Figure 6.3, Tables 8.18, 9.19 and 9.20, Bibliography.
AS/NZS 1170.2:2021 Amd 2:2024 Structural design actions, Part 2: Wind actions	Current Standards Australia/Standards New Zealand	This Amendment applies to the following elements: Clauses 1.4.42, 1.5, 2.5.5, 2.5.6, 4.4.2, 5.3.1.1, 5.3.1.2, 5.3.1.3, 5.3.2.1, 5.3.2.2, 5.3.2.3, 6.4.3,B.6.1, B.6.3, E.4, Figures 3.1(A), 4.2, B.13, C.2, Tables 3.1(A), 6.2, Bibliography.
AS 1530.8.1:2018 Amd 1:2024 Methods for fire tests on building materials, components and structures, Part 8.1: Tests on elements of construction for buildings exposed to simulated bushfire attack - Radiant heat and small flaming sources	Current Standards Australia	The 2018 edition of AS 1530.8.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4055:2021 Amd 1:2024 Wind loads for housing	Current Standards Australia	AS 4055:2021 is amended as follows. The amendments should be inserted in the locations as instructed.
AS 3958:2023 Amd 1:2024 Installation of ceramic and stone tiles	Current Standards Australia	This Amendment applies to the following elements of AS 3958:2023: Figures 3.3.3.1, 3.3.3.2, 3.3.4.1, 3.3.5.1, 5.4.7.3(D) and the Bibliography.
AS/NZS 1428.4.1:2009 AMDT 2 Design for access and mobility, Part 4.1: Means to assist the orientation of people with vision impairment - Tactile ground surface indicators	Current Standards Australia/Standards New Zealand
AS 1668.1:2015 Amd 1:2018 The use of ventilation and air conditioning in building, Part 1: Fire and smoke control in buildings	Current Standards Australia
AS/NZS 1170.0:2002 AMDT 2 Structural design actions, Part 0: General principles	Current Standards Australia/Standards New Zealand
AS 1668.2-2012 Amd 2:2016 The use of ventilation and airconditioning in buildings, Part 2: Mechanical ventilation in buildings	Superseded Standards Australia
AS/NZS 1170.0:2002 AMDT 3 Structural design actions, Part 0: General principles	Current Standards Australia/Standards New Zealand
AS 1851-2012 Amd 1:2016 Routine service of fire protection systems and equipment	Current Standards Australia
AS 1668.2-2012 AMDT 1 The use of ventilation and airconditioning in buildings, Part 2: Mechanical ventilation in buildings	Current Standards Australia
AS/NZS 1170.0:2002 AMDT 1 Structural design actions, Part 0: General principles	Current Standards Australia/Standards New Zealand
AS 3600-1988 AMDT 1 Concrete structures	Withdrawn Standards Australia
AS 4992.1-2006 AMDT 1 Ceramic tiles - Grouts and adhesives, Part 1: Terms, definitions and specifications for adhesives	Superseded Standards Australia
AS 3660.1:2014 Amd 1:2017 Termite management, Part 1: New building work	Current Standards Australia	Sets out requirements for the design and construction of subterranean termite management systems for new buildings and new building work.
AS 1670.1:2018 Amd 1:2021 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Current Standards Australia
AS 3850.2:2015 Amd 1:2018 Prefabricated concrete elements, Part 2: Building construction	Current Standards Australia
AS 5216:2018 Amd 1:2019 Design of post-installed and cast-in fastenings in concrete	Superseded Standards Australia
AS 2568:2019 Amd 1:2022 Purity of medical air produced from on-site compressor systems	Current Standards Australia
AS/NZS 5601.2:2020 Amd 1:2021 Gas installations, Part 2: LP Gas installations in caravans and boats for non-propulsive purposes	Current Standards Australia/Standards New Zealand
AS 1892.5:2020 Amd 1:2021 Portable ladders, Part 5: Selection, safe use and care	Current Standards Australia
AS/NZS 5601.1:2013 Amd 1:2015 Gas installations, Part 1: General installations	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3760:2010 AMDT 1 In-service safety inspection and testing of electrical equipment	Superseded Standards Australia/Standards New Zealand
AS/NZS 3004.2:2014 Amd 1:2015 Electrical installations - Marinas and boats, Part 2: Boat installations	Current Standards Australia/Standards New Zealand
AS/NZS 3760:2010 AMDT 2 In-service safety inspection and testing of electrical equipment	Superseded Standards Australia/Standards New Zealand
AS/NZS 5149.1:2016 Amd 1:2018 Refrigerating systems and heat pumps - Safety and environmental requirements, Part 1: Definitions, classification and selection criteria - Amendment 1: Correction of QLAV, QLMV	Current Standards Australia/Standards New Zealand
AS/NZS 5149.1:2016 Amd 2:2018 Refrigerating systems and heat pumps - Safety and environmental requirements, Part 1: Definitions, classification and selection criteria (ISO 5149-1:2014, MOD)	Current Standards Australia/Standards New Zealand
AS/NZS 5601.1:2013 Amd 3:2020 Gas installations, Part 1: General installations	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3003:2018 Amd 1:2019 Electrical installations - Patient areas	Current Standards Australia/Standards New Zealand
AS/NZS 5601.1:2013 Amd 4:2020 Gas installations, Part 1: General installations	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 4020:2018 Amd 1:2022 Testing of products for use in contact with drinking water	Current Standards Australia/Standards New Zealand
AS/NZS 3010:2017 Amd 1:2020 Electrical Installations - Generating Sets	Current Standards Australia/Standards New Zealand
AS/NZS 5601.1:2013 Amd 2:2016 Gas Installations, Part 1: General installations	Available Superseded Standards Australia/Standards New Zealand
AS 2118.1:2017 Amd 3:2024 Automatic fire sprinkler systems, Part 1: General systems	Current Standards Australia
AS/NZS 1170.2:2011 AMDT 1 Structural design actions, Part 2: Wind actions	Superseded Standards Australia/Standards New Zealand	The 2011 edition of AS/NZS 1170.2 is amended as follows.
AS/NZS 3000:2018 Amd 3:2023 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Current Standards Australia/Standards New Zealand	AS/NZS 3000:2018 is amended as follows.
AS/NZS 1170.2:2011 AMDT 2 Structural design actions, Part 2: Wind actions	Superseded Standards Australia/Standards New Zealand	Amends AS/NZS 1170.2:2011.
AS/NZS 1170.2:2011 AMDT 3 Structural design actions, Part 2: Wind actions	Superseded Standards Australia/Standards New Zealand	Amends AS/NZS 1170.2:2011.
AS/NZS 1170.2:2011 Amd 4:2016 Structural design actions, Part 2: Wind actions	Superseded Standards Australia/Standards New Zealand	Amends AS/NZS 1170.2:2011.
AS/NZS 3000:2018 Amd 2:2021 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Current Standards Australia/Standards New Zealand	2018 edition of AS/NZS 3000 is amended as follows.
AS/NZS 3000:2018 Amd 1:2020 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Current Standards Australia/Standards New Zealand	2018 edition of AS/NZS 3000 is amended as follows.
AS/NZS 1170.2:2021 Amd 1:2023 Structural design actions, Part 2: Wind actions	Current Standards Australia/Standards New Zealand
AS/NZS 5601.1:2022 Amd 1:2023 Gas installations, Part 1: General installations	Current Standards Australia/Standards New Zealand
AS/NZS 3760:2022 Amd 1:2022 In-service safety inspection and testing of electrical equipment and RCDs	Current Standards Australia/Standards New Zealand
AS/NZS 3084:2017 Amd 1:2023 Telecommunications installations - Telecommunications pathways and spaces for commercial buildings	Current Standards Australia/Standards New Zealand	AS/NZS 3084:2017 is amended as follows.
AS/NZS 3000:2000 AMDT 3 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Superseded Standards Australia/Standards New Zealand
AS/NZS 1596:2014 Amd 1:2017 The storage and handling of LP Gas	Current Standards Australia/Standards New Zealand	The 2014 edition of AS/NZS 1596 is amended as follows.
AS/NZS 1596:2014 Amd 2:2020 The storage and handling of LP Gas	Current Standards Australia/Standards New Zealand	The 2014 edition of AS/NZS 1596 is amended as follows.
AS 2658-2008 AMDT 2 LP Gas - Portable and mobile appliances	Superseded Standards Australia	The 2008 edition of AS 2658 is amended as follows.
AS 2658-2008 AMDT 3 LP Gas - Portable and mobile appliances	Superseded Standards Australia	The 2008 edition of AS 2658 is amended as follows.
AS 2658-2008 AMDT 1 LP Gas - Portable and mobile appliances	Superseded Standards Australia	The 2008 edition of AS 2658 is amended as follows.
AS 11801.1:2019 Amd 1:2022 Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)	Current Standards Australia
AS 4666-2012 Amd 1:2018 Insulating glass units	Current Standards Australia
AS 3000-1991 AMDT 7 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)	Withdrawn Standards Australia	1991 edition of AS 3000 is amended as follows.
AS/NZS 3000:2000 AMDT 2 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Superseded Standards Australia/Standards New Zealand	2000 edition of AS 3000 is amended as follows.
AS 3000-1991 AMDT 3 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)	Withdrawn Standards Australia	1991 edition of AS 3000 is amended as follows.
AS 3000-1991 AMDT 4 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)	Withdrawn Standards Australia	1991 edition of AS 3000 is amended as follows.
AS/NZS 3000:2000 AMDT 1 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Superseded Standards Australia/Standards New Zealand	2000 edition of AS 3000 is amended as follows.
AS 3000-1991 AMDT 1 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)	Withdrawn Standards Australia	1991 edition of AS 3000 is amended as follows.
AS/NZS 3000:2007 AMDT 1 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Superseded Standards Australia/Standards New Zealand	2007 edition of AS/NZS 3000 is amended as follows.
AS 3000-1991 AMDT 5 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)	Withdrawn Standards Australia	1991 edition of AS 3000 is amended as follows.
AS 3000-1991 AMDT 6 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)	Withdrawn Standards Australia	1991 edition of AS 3000 is amended as follows.
AS 3000-1991 AMDT 2 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)	Withdrawn Standards Australia	1991 edition of AS 3000 is amended as follows.
AS/NZS 3000:2007 AMDT 2 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Superseded Standards Australia/Standards New Zealand	2007 edition of AS/NZS 3000 is amended as follows.
AS 3958.1-1991 AMDT 1 Ceramic tiles, Part 1: Guide to the installation of ceramic tiles	Superseded Standards Australia
AS 2908.1-1992 AMDT 1 Cellulose-cement products, Part 1: Corrugated sheets	Superseded Standards Australia	The 1992 edition of AS 2908.1 is amended as follows; the amendment should be inserted in the appropriate place.
AS/NZS 2293.1:2018 Amd 1:2021 Emergency lighting and exit signs for buildings, Part 1: System design, installation and operation	Current Standards Australia/Standards New Zealand	The 2018 edition of AS/NZS 2293.1:2018 is amended as follows; the amendments should be inserted in the appropriate place.
AS 3600:2018 Amd 2:2021 Concrete structures	Current Standards Australia	The 2018 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1670.4:2018 Amd 1:2021 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 4: Emergency warning and intercom systems	Current Standards Australia	AS 1670.4:2018 is amended as follows. The amendments should be inserted in the locations as instructed.
AS 2118.1:2017 Amd 2:2020 Automatic fire sprinkler systems, Part 1: General systems	Current Standards Australia	The 2017 edition of AS 2118.1 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS 4200.2:2017 Amd 1:2018 Pliable building membranes and underlays, Part 2: Installation	Current Standards Australia	The 2017 edition of AS 4200.2 is amended as follows; the amendment should be inserted in the appropriate place.
AS 1670.3:2018 Amd 1:2021 Fire detection, warning, control and intercom systems, Part 3: System design, installation and commissioning	Current Standards Australia	AS 1670.3:2018 is amended as follows; the amendments should be inserted in the locations as instructed.
AS/NZS 2327:2017 Amd 1:2020 Composite structures - Composite steel-concrete construction in buildings	Current Standards Australia/Standards New Zealand	The 2017 edition of AS/NZS 2327 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4200.2:2017 Amd 2:2021 Pliable building membranes and underlays, Part 2: Materials	Current Standards Australia	The 2017 edition of AS 4200.2 is amended as follows; the amendments should be inserted in the appropriate place.
AS 3959:2018 Amd 2:2020 Construction of buildings in bushfire-prone areas	Current Standards Australia	The 2018 edition of AS 3959 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4200.1:2017 Amd 1:2021 Pliable building membranes and underlays, Part 1: Materials	Current Standards Australia	The 2017 edition of AS 4200.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1546.3:2017 Amd 1:2018 On-site domestic wastewater treatment units, Part 3: Secondary treatment systems	Current Standards Australia	Amends the 2017 edition of AS 1546.3.
AS 1720.5:2015 Amd 1:2019 Timber structures, Part 5: Nailplated timber roof trusses	Current Standards Australia	The 2015 edition of AS 1720.5 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 3500.1:2021 Amd 1:2022 Plumbing and drainage, Part 1: Water services	Current Standards Australia/Standards New Zealand	Amendment to AS/NZS 3500.1:2021.
AS/NZS 3500.2:2021 Amd 1:2021 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Current Standards Australia/Standards New Zealand	AS/NZS 3500.2:2021 is amended as follows.
SA HB 39:2015 Amd 1:2021 Installation code for metal roof and wall cladding	Current Standards Australia	SA HB 39:2015 is amended as follows.
AS 2918-1990 AMDT 1 Domestic solid fuel burning appliances - Installation	Superseded Standards Australia
AS 1670.1-1995 AMDT 4 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Superseded Standards Australia
AS/NZS 3500.2:2003 AMDT 3 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand
AS 1639-1974 AMDT 1 Code of practice for design and installation of corrugated asbestos cement roofing	Superseded Standards Australia
AS 3959-2009 AMDT 1 Construction of buildings in bushfire-prone areas	Available Superseded Standards Australia
AS/NZS 3500.2:2003 AMDT 2 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.2 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS 1720.1-1997 AMDT 2 Timber structures, Part 1: Design methods	Superseded Standards Australia
AS 4678-2002 AMDT 2 Earth-retaining structures	Current Standards Australia
AS 2419.1-1994 AMDT 1 Fire hydrant installations, Part 1: System design, installation and commissioning	Superseded Standards Australia
AS 4100-1990 AMDT 1 Steel structures	Withdrawn Standards Australia
AS/NZS 3500.1.2:1998 AMDT 1 National plumbing and drainage, Part 1.2: Water supply - Acceptable solutions	Available Superseded Standards Australia/Standards New Zealand	The 1998 edition of AS/NZS 3500.1.2 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2159-1995 AMDT 1 Piling - Design and installation	Available Superseded Standards Australia
AS 1170.1-1989 AMDT 1 Minimum design loads on structures (known as the SAA Loading Code), Part 1: Dead and live loads and load combinations	Superseded Standards Australia
AS/NZS 2904:1995 AMDT 1 Damp-proof courses and flashings	Current Standards Australia/Standards New Zealand
AS 4055-2006 AMDT 1 Wind loads for housing	Current Standards Australia
AS/NZS 2904:1995 AMDT 2 Damp-proof courses and flashings	Current Standards Australia/Standards New Zealand
AS 1670-1995 AMDT 1 Automatic fire detection and alarm systems - System design, installation and commissioning	Superseded Standards Australia
AS 1684.4-2010 AMDT 1 Residential timber-framed constructions, Part 4: Simplified - Non-cyclonic areas	Current Standards Australia
AS/NZS 2269:2004 AMDT 1 Plywood - Structural	Superseded Standards Australia/Standards New Zealand
AS 3959-1999 AMDT 2 Construction of buildings in bushfire-prone areas	Superseded Standards Australia
AS 2118.1-2006 AMDT 1 Automatic fire sprinkler systems, Part 1: General systems	Superseded Standards Australia
AS 3959-1999 AMDT 1 Construction of buildings in bushfire-prone areas	Superseded Standards Australia
AS/NZS 4020:1999 AMDT 1 Products for use in contact with drinking water	Withdrawn Standards Australia/Standards New Zealand
AS 1684.2-1999 AMDT 2 Residential timber-framed construction, Part 2: Non-cyclonic areas	Withdrawn Standards Australia
AS 1905.1:2015 Amd 1:2016 Components for the protection of openings in fire-resistant walls, Part 1: Fire-resistant doorsets	Current Standards Australia
AS 1926.2-2007 AMDT 1 Swimming pool safety, Part 2: Location of safety barriers for swimming pools	Current Standards Australia	The 2007 edition of AS 1926.2 is amended as follows.
AS 1562.1-1992 AMDT 3 Design and installation of sheet roof and wall cladding, Part 1: Metal	Superseded Standards Australia
AS/NZS 3666.1:1995 AMDT 1 Air-handling and water systems of buildings - Microbial control, Part 1: Design, installation and commissioning	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.2:2015 Amd 2 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Superseded Standards Australia/Standards New Zealand
AS 1288-2006 Amdt 3:2016 Glass in buildings - Selection and installation	Superseded Standards Australia	The 2006 edition of AS 1288 is amended as follows.
AS 1056.1-1991 AMDT 2 Storage water heaters, Part 1: General requirements	Superseded Standards Australia
AS 2047-1999 AMDT 1 Windows in buildings - Selection and installation	Available Superseded Standards Australia
AS 1397-2011 AMDT 1 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium	Superseded Standards Australia
AS 2118.1:2017 Amd 1:2017 Automatic fire sprinkler systems, Part 1: General systems	Current Standards Australia
AS 3600-2009 AMDT 2 Concrete structures	Available Superseded Standards Australia
AS 1288-2006 AMDT 1 Glass in buildings - Selection and installation	Superseded Standards Australia
AS 3660.1-1995 AMDT 1 Protection of buildings from subterranean termites, Part 1: New buildings	Superseded Standards Australia
AS 1684.4-1999 AMDT 4 Residential timber-framed construction, Part 4: Simplified - Non-cyclonic areas	Withdrawn Standards Australia
AS 3740-2010 AMDT 1 Waterproofing of domestic wet areas	Superseded Standards Australia
AS 2050-1995 AMDT 1 Installation of roof tiles	Superseded Standards Australia
AS 1639-1990 AMDT 1 The design and installation of corrugated fibre-reinforced cement roofing and wall cladding	Superseded Standards Australia
AS 4100-1998 AMDT 1 Steel structures	Superseded Standards Australia
AS 1170.4-1993 AMDT 1 Minimum design loads on structures (known as the SAA Loading Code), Part 4: Earthquake loads	Superseded Standards Australia
AS 1562.1-1992 AMDT 2 Design and installation of sheet roof and wall cladding, Part 1: Metal	Superseded Standards Australia
AS 1668.2-2002 AMDT 2 The use of ventilation and airconditioning in buildings, Part 2: Ventilation design for indoor air contaminant control	Current Standards Australia
AS 2870-1996 AMDT 4 Residential slabs and footings - Construction	Superseded Standards Australia
AS/NZS 3823.1.2:2001 AMDT 5 Performance of electrical appliances - Air conditioners and heat pumps, Part 1.2: Energy labelling and minimum energy performance standard (MEPS) requirements	Superseded Standards Australia/Standards New Zealand
AS 1926.1-2007 AMDT 1 Swimming pool safety, Part 1: Safety barriers for swimming pools	Current Standards Australia	The 2007 edition of AS 1926.1 is amended as follows.
AS 2159-2009 AMDT 1 Piling - Design and installation	Current Standards Australia
AS/NZS 3500.4:2003 AMDT 2 Plumbing and drainage, Part 4: Heated water services	Available Superseded Standards Australia/Standards New Zealand
AS 1684.2-2006 AMDT 1 Residential timber-framed construction, Part 2: Non-cyclonic areas	Superseded Standards Australia
AS/NZS 4234:2008 AMDT 1 Heated water systems - Calculation of energy consumption	Superseded Standards Australia/Standards New Zealand
AS 2444-1995 AMDT 1 Portable fire extinguishers and fire blankets - Selection and location	Superseded Standards Australia
AS 4100-1990 AMDT 2 Steel structures	Withdrawn Standards Australia
AS 1056.1-1991 AMDT 5 Storage water heaters, Part 1: General requirements	Superseded Standards Australia
AS 2870.1-1988 AMDT 2 Residential slabs and footings, Part 2: Construction	Withdrawn Standards Australia
AS 1684.2-2010 AMDT 2 Residential timber-framed construction, Part 2: Non-cyclonic areas	Available Superseded Standards Australia
AS 2050-2002 AMDT 2 Installation of roof tiles	Superseded Standards Australia
AS 1684.3-1999 AMDT 4 Residential timber-framed construction, Part 3: Cyclonic areas	Withdrawn Standards Australia
AS 1684.2-2010 AMDT 1 Residential timber-framed constructions, Part 2: Non-cyclonic areas	Available Superseded Standards Australia
AS 2870-1996 AMDT 3 Residential slabs and footings - Construction	Superseded Standards Australia
AS/NZS 3500.4:2018 Amd 1:2018 Plumbing and drainage, Part 4: Heated water services	Available Superseded Standards Australia/Standards New Zealand
AS 1657-2013 Amd 1:2016 Fixed platforms, walkways, stairways and ladders - Design, construction and installation	Available Superseded Standards Australia
AS 4072.1-2005 AMDT 1 Components for the protection of openings in fire-resistant separating elements, Part 1: Service penetrations and control joints	Current Standards Australia	The 2005 edition of AS 4072.1 is amended as follows.
AS 3700-2011 Amd 2:2015 Masonry structures	Superseded Standards Australia
AS 1684.3-1999 AMDT 2 Residential timber-framed construction, Part 3: Cyclonic areas	Withdrawn Standards Australia
AS/NZS 4234:2008 AMDT 2 Heated water systems - Calculation of energy consumption	Superseded Standards Australia/Standards New Zealand
AS/NZS 4859.1:2002 AMDT 1 Materials for the thermal insulation of buildings, Part 1: General criteria and technical provisions	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.3:2003 AMDT 3 Plumbing and drainage, Part 3: Stormwater drainage	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 1170.3:2003 AMDT 1 Structural design actions, Part 3: Snow and ice actions	Current Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 1170.3 is amended as follows.
AS 3786-1993 AMDT 1 Smoke alarms	Available Superseded Standards Australia
AS 1288-2006 AMDT 2 Glass in buildings - Selection and installation	Superseded Standards Australia	The 2006 edition of AS 1288 is amended as follows.
AS 3786:2014 Amd 1:2015 Smoke alarms using scattered light, transmitted light or ionization	Available Superseded Standards Australia
AS/NZS 1664.1:1997 AMDT 1 Aluminium structures, Part 1: Limit state design	Current Standards Australia/Standards New Zealand
AS 1926.3-2010 AMDT 1 Swimming pool safety, Part 3: Water recirculation systems	Current Standards Australia	The 2010 edition of AS 1926.3 is amended as follows.
AS 3786-1993 AMDT 4 Smoke alarms	Available Superseded Standards Australia
AS/NZS 3500.2.2:1996 AMDT 1 National Plumbing and Drainage, Part 2.2: Sanitary plumbing and drainage - Acceptable solutions	Available Superseded Standards Australia/Standards New Zealand
AS 2049-2002 AMDT 1 Roof tiles	Current Standards Australia	The 2002 edition of AS 2409 is amended as follows.
AS 3600-2001 AMDT 2 Concrete structures	Superseded Standards Australia
AS 1684.3-2006 AMDT 1 Residential timber-framed construction, Part 3: Cyclonic areas	Superseded Standards Australia
AS/NZS 4586:1999 AMDT 1 Slip resistance classification of new pedestrian surface materials	Withdrawn Standards Australia/Standards New Zealand
AS 2699-1984 AMDT 2 Wall ties for masonry construction	Withdrawn Standards Australia
AS/NZS 3500.3:2003 AMDT 2 Plumbing and drainage, Part 3: Stormwater drainage	Available Superseded Standards Australia/Standards New Zealand
AS 2870-1996 AMDT 1 Residential slabs and footings - Construction	Superseded Standards Australia
AS 2293.1-2005 AMDT 1 Emergency escape lighting and exit signs for buildings - System design, installation and operation	Superseded Standards Australia
AS 2050-2002 AMDT 1 Installation of roof tiles	Superseded Standards Australia
AS 2444-1995 AMDT 2 Portable fire extinguishers and fire blankets - Selection and location	Superseded Standards Australia
AS 1670.1:2015 Amd 1:2017 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Superseded Standards Australia
AS 4586:2013 Amd 1:2017 Slip resistance classification of new pedestrian surface materials	Current Standards Australia	Amendment No. 1 to 4586:2013.
AS 1670.1-2004 AMDT 1 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Available Superseded Standards Australia
AS 2462-1981 AMDT 1 Cellulosic fibre thermal insulation	Superseded Standards Australia
AS/NZS 3823.1.2:2001 AMDT 2 Performance of electrical appliances - Airconditioners and heat pumps, Part 1.2: Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3823.1.2:2001 AMDT 1 Performance of electrical appliances - Airconditioners and heat pumps, Part 1.2: Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance	Superseded Standards Australia/Standards New Zealand
AS 1056.1-1991 AMDT 3 Storage water heaters, Part 1: General requirements	Superseded Standards Australia
AS/NZS 4234:2008 Amd 3:2014 Heated water systems - Calculation of energy consumption	Superseded Standards Australia/Standards New Zealand
AS 1684.4-1999 AMDT 1 Residential timber-framed construction, Part 4: Simplified-Non-cyclonic areas	Withdrawn Standards Australia
AS 3959-2009 AMDT 2 Construction of buildings in bushfire-prone areas	Available Superseded Standards Australia
AS 3700-2001 AMDT 2 Masonry structures	Superseded Standards Australia
AS/NZS 4200.1:1994 AMDT 1 Pliable building membranes and underlays, Part 1: Materials	Superseded Standards Australia/Standards New Zealand
AS/NZS 4600:2005 AMDT 1 Cold-formed steel structures	Superseded Standards Australia/Standards New Zealand
AS 2047-1999 AMDT 2 Windows in buildings - Selection and installation	Available Superseded Standards Australia
AS 1860.2-2006 AMDT 1 Particleboard flooring, Part 2: Installation	Current Standards Australia	The 2006 edition of AS 1860.2 is amended as follows.
AS/NZS 3500.1:2003 AMDT 1 Plumbing and drainage, Part 1: Water services	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1720.1-2010 AMDT 1 Timber structures, Part 1: Design methods	Current Standards Australia
AS/NZS 3823.1.2:2001 AMDT 4 Performance of electrical appliances - Airconditioners and heat pumps, Part 1.2: Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance	Superseded Standards Australia/Standards New Zealand
AS/NZS 3823.1.2:2001 AMDT 3 Performance of electrical appliances - Airconditioners and heat pumps, Part 1.2: Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance	Superseded Standards Australia/Standards New Zealand
AS/NZS 2269.0:2012 Amd 1:2015 Plywood - Structural, Part 0: Specifications	Current Standards Australia/Standards New Zealand
AS 1670.1-1995 AMDT 3 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Superseded Standards Australia
AS 4055-2012 Amd 1:2015 Wind loads for housing	Superseded Standards Australia
AS/NZS 3500.4:2003 AMDT 1 Plumbing and drainage, Part 4: Heated water services	Available Superseded Standards Australia/Standards New Zealand
AS 1684.2-1999 AMDT 4 Residential timber-framed construction, Part 2: Non-cyclonic areas	Withdrawn Standards Australia
AS 4254-2002 AMDT 1 Ductwork for air-handling systems in buildings	Superseded Standards Australia
AS 4254-1995 AMDT 1 Ductwork for air-handling systems in buildings	Superseded Standards Australia
AS 1684.3-2010 AMDT 1 Residential timber-framed constructions, Part 3: Cyclonic areas	Superseded Standards Australia	AS 1684.3-2010 is Amended as follows.
AS 1684.3 C2 SUPP 9-2006 AMDT 1 Residential timber-framed construction, Part 3: Cyclonic areas - C2 Supplement 9: Timber framing span tables - Wind classification C3 - seasoned hardwood - Stress grade F27 (Supplement to AS 1684.3-2006)	Superseded Standards Australia
AS 1926.2-2007 AMDT 2 Swimming pool safety, Part 2: Location of safety barriers for swimming pools	Current Standards Australia	The 2007 edition of AS 1926.2 is amended as follows.
AS 1720.1-2010 Amd 3:2015 Timber structures, Part 1: Design methods	Current Standards Australia
AS 2870.2-1990 AMDT 2 Residential slabs and footings, Part 2: Guide to design by engineering principles	Superseded Standards Australia
AS 1684.4-1999 AMDT 2 Residential timber-framed construction, Part 4: Simplified - Non-cyclonic areas	Withdrawn Standards Australia
AS 3786-1993 AMDT 3 Smoke alarms	Available Superseded Standards Australia
AS 1684.4-2006 AMDT 1 Residential timber-framed construction, Part 4: Simplified - Non-cyclonic areas	Superseded Standards Australia
AS 1191-1985 AMDT 1 Acoustics - Method for laboratory measurement of airborne sound transmission loss of building partitions	Superseded Standards Australia
AS 2293.1-2005 Amd 2:2014 Emergency escape lighting and exit signs for buildings, Part 1: System design, installation and operation	Superseded Standards Australia
AS 1562.1-1992 AMDT 1 Design and installation of sheet roof and wall cladding, Part 1: Metal	Superseded Standards Australia
AS 1056.1-1991 AMDT 4 Storage water heaters, Part 1: General requirements	Superseded Standards Australia
AS 3700-2001 AMDT 1 Masonry structures	Superseded Standards Australia
AS 1720.1-2010 AMDT 2 Timber structures, Part 1: Design methods	Current Standards Australia
AS/NZS 4586:2004 AMDT 1 Slip resistance classification of new pedestrian surface materials	Superseded Standards Australia/Standards New Zealand
AS/NZS 1170.2:2002 AMDT 1 Structural design actions, Part 2: Wind actions	Available Superseded Standards Australia/Standards New Zealand
AS 1684.3-1999 AMDT 3 Residential timber-framed construction, Part 3: Cyclonic areas	Withdrawn Standards Australia
AS 4254-1995 AMDT 2 Ductwork for air-handling systems in buildings	Superseded Standards Australia
AS/NZS 1170.2:2011 Amd 5:2017 Structural design actions, Part 2: Wind actions	Current Standards Australia/Standards New Zealand	The 2011 edition of AS/NZS 1170.2 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3600-1994 AMDT 1 Concrete structures	Superseded Standards Australia
AS/NZS 2269:1994 AMDT 1 Plywood - Structural	Superseded Standards Australia/Standards New Zealand
AS/NZS 1170.3:2003 Amd 2:2017 Structural design actions, Part 3: Snow and ice actions	Current Standards Australia/Standards New Zealand
AS 1720.1-1997 AMDT 3 Timber structures, Part 1: Design methods	Superseded Standards Australia
AS 2870.2-1990 AMDT 1 Residential slabs and footings, Part 2: Guide to design by engineering principles	Superseded Standards Australia
AS/NZS 3500.2.2:1996 AMDT 2 National Plumbing and Drainage, Part 2.2: Sanitary plumbing and drainage - Acceptable solutions	Available Superseded Standards Australia/Standards New Zealand
AS 2870-1996 AMDT 2 Residential slabs and footings - Construction	Superseded Standards Australia
AS 3600-2009 AMDT 1 Concrete structures	Available Superseded Standards Australia
AS/NZS 3500.2:2003 AMDT 4 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand
AS 1428.1-2009 AMDT 1 Design for access and mobility - General requirements for access, Part 1: New building work	Superseded Standards Australia	The 2009 edition of AS 1428.1 is amended as follows.
AS 2419.1-1994 AMDT 2 Fire hydrant installations, Part 1: System design, installation and commissioning	Superseded Standards Australia
AS 1720.1-1997 AMDT 4 Timber structures, Part 1: Design methods	Superseded Standards Australia
AS 1926.1-1993 AMDT 1 Swimming pool safety, Part 1: Fencing for swimming pools	Superseded Standards Australia	The 1993 edition of AS 1926.1—1993 is amended as follows; the amendment should be inserted in the appropriate place.
AS 3700-1998 AMDT 1 Masonry structures	Superseded Standards Australia	The 1998 edition of AS 3700 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4100-1990 AMDT 3 Steel structures	Withdrawn Standards Australia	The 1990 edition of AS 4100 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2462-1981 AMDT 2 Cellulosic fibre thermal insulation	Superseded Standards Australia	The 1981 edition of AS 2462 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1684.3-1999 AMDT 1 Residential timber-framed construction, Part 3: Cyclonic areas	Withdrawn Standards Australia	The 1999 edition of AS 1684.3 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2118.1-1999 AMDT 1 Automatic fire sprinkler systems, Part 1: General requirements	Superseded Standards Australia	The 1999 edition of AS 2118.1 is amended as follows.
AS 1170.4-2007 Amd 1:2015 Structural design actions, Part 4: Earthquake actions in Australia	Current Standards Australia	The 2007 edition of AS 1170.4 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4678-2002 AMDT 1 Earth-retaining structures	Current Standards Australia	The 2002 edition of AS 4678 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1684.2-1999 AMDT 3 Residential timber-framed construction, Part 2: Non-cyclonic areas	Withdrawn Standards Australia	The 1999 edition of AS 1684.2 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3700-2011 AMDT 1 Masonry structures	Superseded Standards Australia	The 2011 edition of AS 3700 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 1664.2:1997 AMDT 1 Aluminium structures, Part 2: Allowable stress design	Current Standards Australia/Standards New Zealand	The 1997 edition of AS 1664.2 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 3500.1:2015 Amd 1:2017 Plumbing and drainage, Part 1: Water services	Superseded Standards Australia/Standards New Zealand	The 2015 edition of AS/NZS 3500.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 4505:2012 Amd 1:2015 Garage doors and other large access doors	Current Standards Australia/Standards New Zealand	The 2012 edition of AS/NZS 4505 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4254-2002 AMDT 2 Ductwork for air-handling systems in buildings	Superseded Standards Australia	The 2002 edition of AS 4254 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1668.2-2002 AMDT 1 The use of ventilation and airconditioning in buildings, Part 2: Ventilation design for indoor air contaminant control	Current Standards Australia	The 2002 edition of AS 1668.2 is amended as follows; the amendment should be inserted in the appropriate place.
AS 1684.4-1999 AMDT 3 Residential timber-framed construction, Part 4: Simplified - Non-cyclonic areas	Withdrawn Standards Australia	The 1999 edition of AS 1684.4 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3700-2001 AMDT 3 Masonry structures	Superseded Standards Australia	The 2001 edition of AS 3700 is amended as follows; the amendment(s) should be inserted in the appropriate place(s)
AS 1288-1994 AMDT 1 Glass in buildings - Selection and installation	Superseded Standards Australia	The 1994 edition of AS 1288 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4055-1992 AMDT 1 Wind loads for housing	Superseded Standards Australia	The 1992 edition of AS 4055 is amended as follows; the amendment should be inserted in the appropriate place.
AS/NZS 3500.2:2003 AMDT 1 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.2 is amended as follows.
AS 1250-1981 AMDT 2 The use of steel in structures (known as the SAA Steel Structures Code)	Withdrawn Standards Australia	AS 1250-1981 amended as follows in the document.
AS/NZS 3500.1:2003 AMDT 2 Plumbing and drainage, Part 1: Water services	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1684.2-1999 AMDT 1 Residential timber-framed construction, Part 2: Non-cyclonic areas	Withdrawn Standards Australia	The 1999 edition of AS 1684.2 is amended as follows.
AS 3700-1998 AMDT 2 Masonry structures	Superseded Standards Australia	The 1998 edition of AS 3700—1998AS 3700 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS/NZS 3500.2 Amd 1:2017 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand	Specifies requirements for the design and installation of sanitary plumbing and drainage from fixtures to a sewer, common effluent system or an on-site wastewater management system; applies to new installations, additions or repairs to existing installations.
AS 3740-1994 AMDT 1 Waterproofing of wet areas within residential buildings	Withdrawn Standards Australia	The 1994 edition of AS 3740 is amended in the document.
AS/NZS 3500.4:2015 Amd 1:2017 Plumbing and drainage, Part 4: Heated water services	Superseded Standards Australia/Standards New Zealand	The 2015 edition of AS/NZS 3500.4 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS 4773.1-2010 AMDT 1 Masonry in small buildings, Part 1: Design	Superseded Standards Australia	The 2010 edition of AS 4773.1 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS 2441-2005 AMDT 1 Installation of hose reels	Current Standards Australia	The 2005 edition of AS 2441 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3600-2001 AMDT 1 Concrete structures	Superseded Standards Australia	The 2001 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1530.3-1989 AMDT 1 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release	Superseded Standards Australia	The 1989 edition of AS 1530.3 is amended as follows; the amendment should be inserted in the appropriate place.
AS 2050-1995 AMDT 2 Installation of roof tiles	Superseded Standards Australia	The 1995 edition of AS 2050 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3959-2009 AMDT 3 Construction of buildings in bushfire-prone areas	Available Superseded Standards Australia	The 2009 edition of AS 3959 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2870.1-1988 AMDT 1 Residential slabs and footings, Part 1: Construction	Withdrawn Standards Australia	The 1988 edition of AS 2870.1 is amended as follows in the document.
AS 1720.1-1997 AMDT 1 Timber structures (known as the SAA Timber Structures Code), Part 1: Design methods	Available Superseded Standards Australia	The 1997 edition of AS 1720.1 is amended as follows in the document.
AS/NZS 3500.3:2003 AMDT 1 Plumbing and drainage, Part 3: Stormwater drainage	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.3 is amended as follows; the amendment should be inserted in the appropriate places.
AS 1288-1994 AMDT 2 Glass in buildings - Selection and installation	Superseded Standards Australia	The 1994 edition of AS 1288 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2047:2014 Amd 2:2017 Windows and external glazed doors in buildings	Current Standards Australia	The 2014 edition of AS 2047 is amended as follows.
AS 1056.1-1991 AMDT 1 Storage water heaters, Part 1: General requirements	Superseded Standards Australia	The 1991 edition of AS 1056.1 is amended as follows; the amendment should be inserted in the appropriate places.
AS 1670.1-1995 AMDT 2 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Superseded Standards Australia	The 1995 edition of AS 1670.1 is amended as follows; the amendment should be inserted in the appropriate place.
AS 1428.4-1992 AMDT 1 Design for access and mobility, Part 4: Tactile ground surface indicators for the orientation of people with vision impairment	Superseded Standards Australia	The 1992 edition of AS 1428.4 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1428.1-2009 Amd 2:2017 Design for access and mobility, Part 1: General requirements for access	Superseded Standards Australia	The 2009 edition of AS 1428.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1170.4-2007 Amd 2:2018 Structural design actions, Part 4: Earthquake actions in Australia	Current Standards Australia	The 2007 edition of AS 1170.4 is amended as follows in the document.
AS 3786-1993 AMDT 2 Smoke alarms	Available Superseded Standards Australia	The 1993 edition of AS 3786 is amended in the following document.
AS 1735.12-1999 AMDT 1 Lifts, escalators and moving walks, Part 12: Facilities for persons with disabilities	Superseded Standards Australia	The 1999 edition of AS 1735.12 is amended as follows; the amendment(s) should be inserted in the appropriate place.
AS 2419.1-2005 AMDT 1 Fire hydrant installation, Part 1: System design, installation and commissioning	Superseded Standards Australia	The 2005 edition of AS 2419.1 is amended in the documents.
AS 2047:2014 Amd 1:2016 Windows and external glazed doors in buildings	Current Standards Australia	The 2014 edition of AS 2047 is amended as follows in the document.
AS 4773.1:2015 Amd 1:2016 Masonry in small buildings, Part 1: Design	Current Standards Australia	The 2015 edition of AS 4773.1 is amended as follows in the document.
AS 5113:2016 Amd 1:2018 Classification of external walls of buildings based on reaction to fire performance	Current Standards Australia	The 2016 edition of AS 5113 is amended as follows.
AS 4100:2020 Amd 1:2021 Steel Structures	Current Standards Australia	Correction amendment to AS 4100:2020.
AS 3600:2018 Amd 1:2018 Concrete Structures	Current Standards Australia	The 2018 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3786:2014 Amd 2:2018 Smoke alarms using scattered light, transmitted light or ionization	Available Superseded Standards Australia	Specifies requirements, test methods and functional criteria for smoke alarms that operate using scattered light, transmitted light or ionization, intended for household or similar residential applications (Amendment 2, 2018).
AS 5146.1:2015 Amd 1:2018 Reinforced Autoclaved Aerated Concrete, Part 1: Structures	Current Standards Australia	The 2015 edition of AS 5146.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3959:2018 Amd 1:2019 Construction of buildings in bushfire-prone areas	Current Standards Australia	The 2018 edition of AS 3959 is amended as follows; the amendments should be inserted in the appropriate places.